Hey.
Im pretty new in Wireless routers,
My problem is I can't login into http://my.firewall/ ["Page Cannot be Displayed"]
therefore i cant Configure my router and cannot connect to the Internet with it.

Tried also to connect through tht IP.
Which also doesn't resolved automaticaly by the routher when i connect it.

Doesnt work also when i define it manualy.

Thanks inadvance,
-Tal

With the information given I can only suspect that the problem is network related...

1.- You are not getting a valid IP, Gateway, DNS, etc... This could be related to network configuration, because the Z100G has a built-in DHCP Server
2.- You are not wired to the router, remember that if you want to configure the Z100G you must do it wired, wireless network is not intended for this.

Good luck, if you have any more trouble feel free to ask it here, remember to be as descriptive as possible to avoid blind guesses.

try https://my.firewall

http://my.firewall/ will work just fine. You must use a wired connection to reach it. It is not available from a wireless unit for security reasons.

If you check the IP address on your wired machine, it must be a 192.168.10.xxx number. Nothing else will work.

Connect your computer via ethernet cable to any of the four LAN ports and reboot your computer. If you don't get an IP address from the Z100G then you might not have DHCP enabled.

Ok, thank you.
Now i managed to login my.firewall
after i've connected the Router to LAN and not WAN.

now, another help needed :

"Internet Connection Method"
I've contact the ISP, to select the method.
after choosing the PPTP, I have to fill up some fields.
The ISP won't tell me the exact details need to be filled, cuz it's not int their services to define routers.

So, what's the "Server IP" ? the IP filled in the "Network Card" ?
What do i fill in "Internal IP" & "Subnet Mask"?

Thanks

Set it for DHCP and obtain DNS automatically.
Server IP is the PPTP authentication server.
For further assistance please contact our support team.

Thanks!