I love the Z100g but still no QOS for VOIP in V7.5.51x!
If I put my Motorola VOIP box in front of the Z100G and use setup the vpn "set device behindNAT" command I cannot access the Z100g through the vpn! Therefore I have put the VoIP box behind the Z100g, can vpn ok (After removing the behindNAT parameter) and wish to QOS my VoIP traffic.

May be QOS in the next release??? PLEASE.
Thanks

This message has been edited. Last edited by: vbuster,

Supposedly there is *some* tweaking you can do for VOIP but not full QOS.. At this point its pretty much been said QOS is not going to be added to the ZA100, as it would dilute the value of their Sofa@Office products.. Feel free to post it in the Suggestions forum (but yah might want to do a search on the topic)
Mebby well get lucky this year

At the moment there is indeed no QoS planned for the Z100 .
This unit is cheaper then the Safe@Office and has therefore less features then the Safe@ .
Depending on how you connect the Motorola you can still access it even if you use the behind nat command .
Like if you added (need) a route to access it .
As routes are added to a Remote access VPN .
But QoS won't be added to the Z100 .

Im wondering if there could be a way to just prioritize voice traffic over data.. Not full QOS mind you.. This problem keeps rearing its ugly head.. or be able to set one network object priority over the rest...

Can keep understanding this reluctance to add full QOS.. but a lot of home users are moving to VOIP....