ZoneAlarm Secure Wireless Router Z100G Discussion Forum

For other ZoneAlarm products click here

Our support personnel monitor this forum, however note this is not an official support channel - to contact support, click the button on the right.

Moderators: Ido, Marina, wendy
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Junior Member
Posted
I'm using a ZoneAlarm Z100G router that has been functioning properly for a very long time, but now when I try to go to my.firewall all I can ever get is an 'unable to connect' message.

How can I go about solving this problem?
 
Posts: 1 | Registered: March 27, 2008Reply With QuoteEdit or Delete MessageReport This Post
Junior Member
Posted Hide Post
With very little information to go on, I would recommend you power the z100 off and on and then try again. And document any other information on the situation. Can you get to other web sites? Has anything changed on your network recently. etc.
 
Posts: 12 | Registered: March 03, 2008Reply With QuoteEdit or Delete MessageReport This Post
Advanced Member
Picture of Texas Rocket
Posted Hide Post
Are you wireline or wireless?


the rocket
 
Posts: 174 | Registered: March 12, 2007Reply With QuoteEdit or Delete MessageReport This Post
Junior Member
Posted Hide Post
Wire or wireless. Ah yes, an excellent question. Wired http://my.firewall
Wireless you need to use https://my.firewall
 
Posts: 12 | Registered: March 03, 2008Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 


© Copyright 2006 SofaWare Technologies Ltd.